|
|
|
|
|
|
|
|
日本URAWA拋光機UP210+UA05A打磨機研磨機
|
|
UP210 series
Compact and light weight, this unit takes up only a little of working space.
Special circuitry guarantees the RPM remains constant if once it is set.
Three ways of operation modes can be selected by your choice of optional accessories.
1. Operation by manual mode, without optional accessories.
2. Remote control by ON-OFF Foot Switch FS18.
3. Remote control by Variable Foot Controller VC10.
Complete safety systems are installed on the UP210 enclosure.
1. A fuse protects against abnormal current at primary and secondary circuit of the transformer.
2. A thermal fuse protects against the overheating of teh transformer.
3. A thermal sensor protects against the overheating of the output circuit block.
4. Accessible metal parts are concealed into UP210 enclosure.
5. Electronic circuit breaker protects against the overload of micro motor handpiece
Specifications
Input : UP211 AC120V 50/60 Hz, UP213c AC230V 50Hz 30VA
Output : DC3-30V 0.4A
Weight : 1.7 kg
Size : W130 × D132 × H87mm
Accessories：Motor Stand (KP91-108)
Optional Accessories：ON-OFF Foot Switch (FS18)
Variable Foot Controller (VC60)
日本URAWA轉動式工具頭 UA05A
Technical data
Input DC: 30V
Rotational speed :5000~55000min
Collets :φ2.35\φ3.0mm
Weight:170g
Dimensions: φ27.5*136mm
|
|
|
|
|
|
|
|
|
|
